多槽手動超聲波清洗機是一種常用于工業、醫療、電子等領域的清洗設備，以下是關于它的相關知識：

Multi slot manual ultrasonic cleaning machine is a commonly used cleaning equipment in industrial, medical, electronic and other fields. The following is related knowledge about it:

結構組成

Structural composition

清洗槽：通常由多個不同功能的槽體組成，一般包括超聲波清洗槽、漂洗槽、干燥槽等。槽體多采用不銹鋼材質，具有耐腐蝕性和良好的超聲波傳導性能。

Cleaning tank: It is usually composed of multiple tanks with different functions, including ultrasonic cleaning tank, rinsing tank, drying tank, etc. The tank body is mostly made of stainless steel material, which has corrosion resistance and good ultrasonic conductivity.

超聲波發生器：為清洗機提供高頻電能，驅動換能器產生超聲波。它可以調節超聲波的頻率、功率等參數，以適應不同的清洗需求。

Ultrasonic generator: Provides high-frequency electrical energy to the cleaning machine, driving the transducer to generate ultrasonic waves. It can adjust the frequency, power and other parameters of ultrasonic waves to meet different cleaning needs.

換能器：將電能轉換為機械能，產生超聲波振動。一般安裝在清洗槽底部或側面，通過將高頻電能轉換為機械振動，使清洗液中產生大量微小氣泡，實現清洗效果。

Transducer: converts electrical energy into mechanical energy and generates ultrasonic vibration. Generally installed at the bottom or side of the cleaning tank, it converts high-frequency electrical energy into mechanical vibration to generate a large number of tiny bubbles in the cleaning solution, achieving the cleaning effect.

加熱系統：部分多槽手動超聲波清洗機配備加熱系統，可對清洗液進行加熱。適當的溫度能提高清洗劑的活性和清洗效率，通常加熱溫度可在常溫至 80℃左右范圍內調節。

Heating system: Some multi slot manual ultrasonic cleaning machines are equipped with a heating system that can heat the cleaning solution. Appropriate temperature can improve the activity and cleaning efficiency of cleaning agents, and the heating temperature can usually be adjusted within the range of room temperature to around 80 ℃.

循環過濾系統：用于過濾清洗液中的雜質和污垢，保持清洗液的清潔度，延長清洗液的使用壽命，同時也有助于提高清洗效果。

Circulating filtration system: used to filter impurities and dirt in cleaning solution, maintain the cleanliness of the cleaning solution, extend the service life of the cleaning solution, and also help improve the cleaning effect.

工作原理

working principle

多槽手動超聲波清洗機主要基于超聲波的空化效應工作。當超聲波發生器產生的高頻振蕩信號傳送給換能器后，換能器將其轉換為高頻機械振動并傳遞到清洗液中。在清洗液中，這些高頻振動會使液體分子產生疏密變化，形成無數微小的氣泡。在氣泡形成和閉合的過程中，會產生瞬間的高溫、高壓和強大的沖擊力，這些力量能夠將物體表面的污垢、油脂、灰塵等雜質迅速剝落，從而達到清洗的目的。在多槽設計中，不同的槽體可以實現不同的清洗階段，如粗洗、精洗、漂洗等，以提高清洗質量。

The multi slot manual ultrasonic cleaning machine mainly works based on the cavitation effect of ultrasonic waves. When the high-frequency oscillation signal generated by the ultrasonic generator is transmitted to the transducer, the transducer converts it into high-frequency mechanical vibration and transmits it to the cleaning solution. In the cleaning solution, these high-frequency vibrations will cause changes in the density of liquid molecules, forming countless tiny bubbles. During the formation and closure of bubbles, instantaneous high temperature, high pressure, and strong impact force are generated, which can quickly peel off impurities such as dirt, grease, dust, etc. on the surface of the object, thus achieving the purpose of cleaning. In multi tank design, different tank bodies can achieve different cleaning stages, such as coarse washing, fine washing, rinsing, etc., to improve cleaning quality.

特點

characteristic

清洗效果好：能夠深入到物體的細微縫隙和孔洞中，對復雜形狀的物體也能進行全面清洗，清洗效果顯著，可有效去除各類頑固污垢。

Good cleaning effect: It can penetrate into the subtle gaps and holes of objects, and can comprehensively clean complex shaped objects. The cleaning effect is significant and can effectively remove various stubborn dirt.

操作靈活：多槽設計使得用戶可以根據不同的清洗需求和工藝，自由組合清洗步驟，手動控制每個槽體的工作狀態，如清洗時間、溫度、功率等參數。

Flexible operation: The multi slot design allows users to freely combine cleaning steps according to different cleaning needs and processes, and manually control the working status of each slot body, such as cleaning time, temperature, power and other parameters.

適用性強：可適用于多種材質和類型的物品清洗，如金屬、玻璃、塑料、陶瓷等，廣泛應用于電子、機械、醫療、珠寶、光學等多個行業。

Strong applicability: Suitable for cleaning various materials and types of items, such as metal, glass, plastic, ceramics, etc., widely used in multiple industries such as electronics, machinery, medical, jewelry, optics, etc.

成本較低：相對于一些自動化程度較高的清洗設備，多槽手動超聲波清洗機的價格較為親民，且維護成本相對較低，適合中小企業或對清洗量要求不是特別大的用戶使用。

Low cost: Compared to some highly automated cleaning equipment, multi slot manual ultrasonic cleaning machines are more affordable and have relatively low maintenance costs, making them suitable for small and medium-sized enterprises or users who do not have particularly large cleaning volume requirements.

操作注意事項

Operation precautions

正確安裝和連接：在使用前，要確保清洗機各部件安裝牢固，超聲波發生器與換能器之間的連接正確無誤，電源供應穩定且符合設備要求。

Proper installation and connection: Before use, ensure that all components of the cleaning machine are securely installed, the connection between the ultrasonic generator and transducer is correct, the power supply is stable and meets the equipment requirements.

選擇合適的清洗液：根據被清洗物品的材質和污垢類型，選擇合適的清洗液。避免使用對清洗槽或被清洗物品有腐蝕性的清洗液，同時要注意清洗液的濃度和配比，以達到最佳清洗效果。

Choose the appropriate cleaning solution: Select the appropriate cleaning solution based on the material and type of dirt of the item being cleaned. Avoid using cleaning solutions that are corrosive to the cleaning tank or the items being cleaned, and pay attention to the concentration and ratio of the cleaning solution to achieve the best cleaning effect.

控制清洗參數：根據清洗對象和清洗要求，合理設置超聲波的功率、頻率、清洗時間和溫度等參數。一般來說，功率越大、清洗時間越長，清洗效果越好，但也要考慮到被清洗物品的耐受程度，避免因參數設置不當而損壞物品。

Control cleaning parameters: Set the power, frequency, cleaning time, and temperature of ultrasonic waves reasonably according to the cleaning object and requirements. Generally speaking, the higher the power and the longer the cleaning time, the better the cleaning effect. However, it is also necessary to consider the tolerance of the cleaned items and avoid damaging them due to improper parameter settings.

安全操作：在清洗機運行過程中，不要將手或其他身體部位直接放入清洗槽內，以免受到超聲波和清洗液的傷害。同時，要定期檢查設備的電氣系統和接地情況，確保操作安全。

Safe operation: During the operation of the cleaning machine, do not put your hands or other body parts directly into the cleaning tank to avoid injury from ultrasonic waves and cleaning solution. At the same time, it is necessary to regularly inspect the electrical system and grounding of the equipment to ensure safe operation.

維護保養

Maintenance and upkeep

定期清潔槽體：清洗完成后，及時清理清洗槽內的污垢和雜質，防止污垢堆積影響清洗效果和設備性能。可使用軟布和溫和的清潔劑對槽體進行擦拭，避免使用尖銳工具刮傷槽體表面。

Regularly clean the tank body: After cleaning, promptly clean the dirt and impurities in the cleaning tank to prevent the accumulation of dirt from affecting the cleaning effect and equipment performance. Soft cloth and mild cleaning agent can be used to wipe the groove body, avoiding scratching the surface of the groove body with sharp tools.

檢查超聲波系統：定期檢查超聲波發生器和換能器的工作狀態，查看是否有異常聲音、發熱等現象。如有故障，應及時聯系專業人員進行維修。

Check the ultrasonic system: Regularly inspect the working status of the ultrasonic generator and transducer to see if there are any abnormal sounds, heating, or other phenomena. If there is a malfunction, professional personnel should be contacted promptly for repair.

更換清洗液和過濾器：根據清洗液的使用情況和污染程度，定期更換清洗液。同時，按照設備說明書的要求，定期更換循環過濾系統中的過濾器，以保證清洗液的清潔度。

Replace cleaning solution and filter: Regularly replace the cleaning solution according to its usage and degree of contamination. At the same time, according to the requirements of the equipment manual, regularly replace the filters in the circulating filtration system to ensure the cleanliness of the cleaning solution.

保持設備干燥：在設備不使用時，應保持設備干燥，避免清洗槽內積水，防止發生腐蝕和電氣故障。

Keep the equipment dry: When the equipment is not in use, it should be kept dry to avoid water accumulation in the cleaning tank and prevent corrosion and electrical failures.

本文由多槽手動超聲波清洗機友情奉獻.更多有關的知識請點擊: http://www.jnthcsb.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from a multi slot manual ultrasonic cleaning machine For more information, please click: http://www.jnthcsb.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.